0769-82056828 
XB-SW-668W| Product ID | Product Image | Product Description | Product Code | Production status | Shipping Cycle | Gross item weight | MPQ | MOQ | Production in transit | Competitive purchases | Operation |
XB-SW-668W  3D
 Drawings |
.png) .png) |
The 6.5X6.5X8.5MM tilting ball switch/XB-SW-668L is a ball type tilting induction trigger switch. When the XB-SW668L angle switch is upright, the two pairs of parallel feet are connected; When the product tilts in any direction and exceeds 45 degrees or 10 degrees, the switch is in the 0FF state. Under normal use, the switch life can reach 100000 times | Normal | 3~7 days | 0.3g | 1000 | 5000 | 20000 |  Compatible Xibang |
||
| XB-SW-668W-X 3D
Drawings |
.png) .png) |
Vibration switch. 5 * 6.5 * 8.5MM/tilt vibration switch 45 degree bend 4 feet/tilt angle ball switch 45 degree/45 degree tilt switch 4PIN | Normal | 3~7 days | 0.3g | 1000 | 5000 | 20000 | Compatible Xibang |
| Product material | 1.Tilt Switch | material quality |
| 2. Steel beads | SUS / Brass silver plating | |
| 3. Plastic | Winnisolone resistance | |
| 4. The Pin needle at No | Brass Silver / Brass Gold plated | |
| 5. Working principle | Tilt guide | |
| Usage temperature range: | -10℃ to 60℃ | |
| Maximum rating (resistance load): | 10mA 6V DC | |
| Minimum rating (resistance load): | 2uA 1V DC | |
| withstand voltage: | 250V AC | |
| insulation resistance: | >10 MΩ | |
| Closed circuit resistance: | <30 Ω | |
| Terminal pull | 250gf±500gf | |
| Electric performance | Salt Spray Test | The 95% relative humidity was 40℃ 24 / h |
| Operation life | 200,000 times | |
| welding temperature | 250℃±10℃ | |
| mechanical properties | weld period | <5 Seconds |
| project | test condition | function |
| durability | ||
| Welding experiment | The top of the terminal was immersed in the solder cell at 2mm depth at 250 ± 5℃ for 3 seconds | More than 95% of the immersed surface will be covered with tin |
| No lead tin test | Alloy:Sn 96.5% Cu 3% Ag 0.5% | |
| Ingredients: tin 96.5% copper 3% silver 0.5% | ||
| Reflow welding heat test |
|
The body has no deformation and can be satisfied with the mechanical and electrical performance |
| Temperature refers to the temperature of the PC plate surface | ||
| The PC plate is 1.0 mm thick | ||
ABS English
Customer Service 1
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Website