0769-82056828 
XB-SK22D15L6| Product ID | Product Image | Product Description | Product Code | Production status | Shipping Cycle | Gross item weight | MPQ | MOQ | Production in transit | Competitive purchases | Operation |
XB-SK22D15L6  3D
 Drawings |
  |
Toggle switch, two gears on the side, double row high temperature salt spray resistant for 24 hours, 14.6x7.1x11.8, black handle height 6mm | 28182 | Normal | 7-10 days | 0.000 | 500 pieces/bag | 1000 | 10000 |  Compatible Xibang |
| Product material | 1.KNOB | PA66 Black | ||
| 2.FRAME | STEEL STRIP NI PLATED | |||
| 3.Base | PHENOLIC RESIN NATURAL | |||
| 4.Terminal | BRASS ag Plated | |||
| 4. Contact clip | PAS STRIP ag Plated | |||
| 5.SPRING | SUS STRIP NATURAL | |||
| Operating temperature range | -40℃ to 85℃ | |||
| Maximum rating (resistive load) | 0.3A 4V DC | |||
| Minimum rating (resistive load) | 50A 3V DC | |||
| Electrical performance | Withstand voltage | 500V AC for 1 minute | ||
| insulation resistance | 100MΩ min. 500V DC | |||
| Contact resistance (at initial stage/after service life) | 70mΩ max./130mΩ max. | |||
| Durability | No load life | 10,000 cycles 100mΩ max. | ||
|
Load life (maximum rated load) |
10,000 cycles 130mΩ max. | |||
| Environmental resistance | Cold resistance | -20℃ 500h | ||
| Heat resistance | 85℃ 500h | |||
| Moisture resistance | 60℃, 90 to 95%RH 500h | |||
| Welding conditions | ||||
| During reflow soldering | ||||
| 1. Heating method | Up and down heating mode of far infrared heating | |||
| 2. For temperature measurement | φ zero point one φ 0.2 CA (K) or CC (T) measuring position is measured at the welding connection part (copper foil surface) and fixed with heat-resistant tape | |||
| 3. Temperature distribution | ||||
|
||||
| (1) The above conditions refer to the surface temperature of parts of printed circuit board. According to the material, size, thickness, etc. of the circuit board, the temperature of the circuit board and the surface temperature of the switch will be very different. For the surface temperature of the switch, please use it within the above conditions. | ||||
| (2) According to the type of veneer welding groove and different conditions, the results are different. Please fully confirm before use. | ||||
| During manual welding | welding temperature | 320±5℃ | ||
| Welding time | 4s max. | |||
ABS English
Customer Service 1
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Website